Top 10 4In Shark Fin Antenna

Nowadays, there are so many products of 4in shark fin antenna in the market and you are wondering to choose a best one.You have searched for 4in shark fin antenna in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 4in shark fin antenna which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
598 reviews analysed
Proxicast Professional Low-Profile MIMO LTE + GPS 3-in-1 Combination Screw Mount Vehicle Antenna
- Combines 2 LTE + 1 GPS antennas into a single enclosure
- Provides 2×2 MIMO capability on all LTE systems worldwide
- Ultra low-profile 1.26 inch high rugged radome is perfect for transportation, telematics and remote monitoring applications
- Extra long coax leads for large vehicles – buses, trains, trucks, vans, ambulances
- Installs in minutes with just 1 hole. Includes all necessary cabling hardware. Completely weatherproof.
Proxicast’s 3-in-1 LTE/GPS antenna is a low-profile, heavy-duty, multi-element / multi-band combo antenna designed for use in fleet management, mobile video, fire, police, EMS and remote monitoring applications that cost-effectively combines high efficiency and peak gain in a compact easy to install form factor.
Featuring 2 LTE cellular and 1 GPS elements, it is ideally suited for 2×2 MIMO vehicular modems and routers from vendors such as Motorola, Sierra, Cisco, Cradlepoint, Digi, MoFi, Pepwave, Proxicast and others.
LTE coverage includes all bands used by commercial and public safety operators worldwide. The active GPS element has a low noise amplifier (LNA) and covers the GPS L1 band.
Each antenna element includes a 5 meter (16.4 ft) low-loss pre-terminated coax cable.
The slim, durable ABS radome has the lowest profile (1.26 in) of any combo antenna and is fully waterproof. It’s smooth dome withstands car washes and tree branches.
Installation requires only a 1.25 in diameter hole. The included rubber gasket, adhesive pad and mounting nut seal the opening from water and dust.
Specifications
LTE
• Frequency Range: 698-960 / 1710-2700 MHz
• Gain: 3 dBi x 2
• Cable: 2x 5 meters RG58U
• Connector: 2x SMA Male
GPS
• Frequency: 1575.42 MHz
• Gain: 28±2dB Typical
• Polarization: RHCP
• DC Voltage: 2.2-5.0V
• Cable: 5 meters RG174
• Connector: SMA Male
Mechanical
• Material: ABS / Brass / Steel / Rubber
• Color: Black
• Mounting: 31 mm (1.25 in) hole – nut, washer & adhesive included
• Ground Plane: Integrated
• Ingress: IP67
• Op. Temp.: -40 to +85C
• Dimensions: 143.6 x 32 mm (5.7 x 1.26 in) when mounted
• Weight: 0.9 kg (2 lb)
See below for full Specification Sheet
Since 2000, USA-based Proxicast has been manufacturing innovative professional grade wireless equipment.
AntennaMastsRus – Made in USA – 4" Black Aluminum Antenna is Compatible with Ford F-150 (2009-2019)
- Fits: 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 Ford F-150
- 4″ BLACK Aluminum Antenna – Manufactured and Anodized here in our HOME state, Wisconsin!!! Features Stainless Steel threading giving strength for many year of use.
- Manufactured with CARE and PRIDE using state of the art Swiss machines. Using the finest machines allows for consistent perfection of every antenna that we produce. First we manufacture our antennas from local raw 6061 aluminum. Secondly, they’re anodized locally ensuring a durable, clean and long lasting vibrant finish for many years of use on your vehicle. Anodized coating cannot peel or flake off. It is part of the metal and gives the aluminum a deeper, richer metallic appearance.
- Installation of our antenna is simple. Only tool required is one to remove your current antenna. Installation is typically completed in minutes.
- Antennas main design is for appearance enhancements. AM/FM reception performance may decrease. If your geographical location is challenging for this antenna upon install, utilize our hassle free returns. For the Ultimate Reception Short Antenna, click on our 6 3/4″ Antenna!!
This is a “BRAND NEW” Custom SHORT 4″ Black Aluminum Antenna Mast. Sick of a Broken/Bent antenna or the obnoxiously tall un-stylish antenna your vehicle comes with?? Then this is the custom solution for you! This antenna is Manufactured and Anodized right here in Wisconsin!! Our experience with fit and finish is: If you want it done right, you must do it yourself! No one beats U.S.A Quality, PERIOD! This antenna is made of 6061 grade aluminum construction and finished with a durable Anodized Coating. The anodized coating cannot peel or flake off. It is part of the metal and gives the aluminum a deeper, richer metallic appearance. There will be a reduction in antenna performance due to the antenna size being shortened from the Factory antenna. Any questions or concerns on any of our products feel free to contact us by telephone or email by clicking on TheAntennaSource about us page here on Amazon.
** This antennas main design is for appearance enhancements. Its AM/FM radio reception performance works best for local stations (Satellite Radio/Navigation/Bluetooth not effected). For the BEST reception short antenna check out our SHORT 6 3/4″ antenna found in our store.
Fits:
2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Ford F-150
HOTRIMWORLD Carbon Fiber Auto Roof Shark Fin Antenna Cover Trim for Toyota 86 Scion FR-S GT86 2012-2019
- Fit For Toyota 86 GT86 Scion FR-S 2012-2019
- 1pcs, Please make sure this product is fit for your car,thank you !
- Material:Carbon Fiber. Colour: Same As Pictures .
- Type:Exterior Styling
- This product has double sided paste , The paste effect depends on paste conditions and the correct way of installation. Please see the installation manual.
Fit For Toyota 86 GT86 Scion FR-S 2012-2019
① Clean the place where you need to paste and then wipe the water with towel or tissues. It area should not have oil, water, wax etc.
② Determine the installation location and then make comparison of the product and installation location. If the product doesn’t fit your vehicle, please contact us immediately and DO NOT INSTALL.
③ When tearing off the double-sided adhesive of cover trim, you can’t touch the double sided paste with your hand.
④ In order to achieve better effect, if the temperature is below 20 degrees, we suggest heating double sided adhesive with hair dryer or lighter .(Do not heat over 40 degrees).
⑤ Align position and then paste. The paste effect depends on paste conditions and correct installation.
⑥ 20-30 seconds or more when pasting and don’t dip the item into water within 48 hours.
1 Pc Universal Polished Black 5" in / 127 mm Real Carbon Fiber Screw Type Short Stubby Antenna Sport Auto Car SUV AM/F
- Brand New. Pack of 1. Caution: Fits External Antenna Only (Please verify screw/adapter sizes on picture before purchase!)
- Approximately 4.9 in Length x 0.5 in Diameter
- Polished Black with 100% Hand-Laid Grade A-3K Twill Real Carbon Fiber Surface Finish.
- Upgrade Style Appearance with Ultra Light Weight Aluminum Design.
- Easy Direct Screw-On Replacement. Modification, Cutting, or Drilling are not required.
FOLCONROAD Universal Car Auto Shark Fin Roof Antenna Radio Decorate Aerial Cover [White]
If you want to buy more products about Folconroad, please don’t hesitate to contact us. If you are a business customer, we support wholesale, more preferential prices are waiting for you.
Features:
With this stylish euro-style decorative car aerial, make your car instantly more graceful and trendy.
This product reduces the car body’s static electricity.
It can be easily stuck to the top of any car or trunk with its adhesive.
Never fret the elements because it is windproof and water resistant!
Fitment :Universal fit, You can stick this on the top of your car
Description:
Frequence Range: Universal type
Material Type: ABS
Suitable for:various car
Package Included:
1 x Car Auto Shark Fins Shape Aerial Cover
Notes:
1. The color of the item may vary slightly due to photography and your own computer
2. This antenna only play a decorative role, it can not receive any signal
AntennaMastsRus – Made in USA – 4 Inch Black Aluminum Antenna is Compatible with Nissan 350Z (2003-2009)
- Fits: 2003-2009 Nissan 350Z
- 4″ BLACK Aluminum Antenna – Manufactured and Anodized here in our HOME state, Wisconsin!!!
- Manufactured with CARE and PRIDE using state of the art Swiss machines. Using the finest machines allows for consistent perfection of every antenna that we produce. First we manufacture our antennas from local raw 6061 aluminum. Secondly, they’re anodized locally ensuring a durable, clean and long lasting vibrant finish for many years of use on your vehicle. Anodized coating cannot peel or flake off. It is part of the metal and gives the aluminum a deeper, richer metallic appearance.
- Installation of our antenna is simple. Only tool required is one to remove your current antenna. Installation is typically completed in minutes.
- Antennas main design is for appearance enhancements. AM/FM reception performance may decrease. If your geographical location is challenging for this antenna upon install, utilize our hassle free returns. For the Ultimate Reception Short Antenna, click on our 6 3/4″ Antenna!!
This is a “BRAND NEW” Custom SHORT 4″ Black Aluminum Antenna Mast. Sick of a Broken/Bent antenna or the obnoxiously tall un-stylish antenna your vehicle comes with?? Then this is the custom solution for you! This antenna is Manufactured and Anodized right here in Wisconsin!! Our experience with fit and finish is: If you want it done right, you must do it yourself! No one beats U.S.A Quality, PERIOD! This antenna is made of 6061 grade aluminum construction and finished with a durable Anodized Coating. The anodized coating cannot peel or flake off. It is part of the metal and gives the aluminum a deeper, richer metallic appearance. There will be a reduction in antenna performance due to the antenna size being shortened from the Factory antenna. Any questions or concerns on any of our products feel free to contact us by telephone or email by clicking on TheAntennaSource about us page here on Amazon.
** This antennas main design is for appearance enhancements. Its AM/FM radio reception performance works best for local stations (Satellite Radio/Navigation/Bluetooth not effected). For the BEST reception short antenna check out our SHORT 6 3/4″ antenna found in our store.
AUTUT Shark Fin Design Car Decorative Antenna Dummy Antenna Black
- Made of the plastic material, is designed with shark fin shape.
- Package Content: 1 x car antenna
- Color: Black, Gray
- Suitable for all Cars and you can stick it on the top of your car.
- Novel shark fin shaped decor antenna is ideal choice for your car, make your car more graceful and trendy.
- Exclusively trendy design, get your car stand out from crowd!
Product Name: car antenna; material: plastic
Package Content: 1 x car antenna;
Color: Black, Gray
AUTUT Shark Fin Antenna Car Roof Radio Antenna Decorative Antenna with Adhesive Base, Black
- ????【PACKAGE】1 x Car Radio Antenna, Black.
- ????【DIMENSION】156 x 76 x 75 mm/ 6.1 x 3 x 3 inches (L*W*H).
- ????【DESIGN】Made of the plastic material, is designed with shark fin shape.
- ????【FUNCTION】Can enhance the signal and achieve the purpose of decoration.
- ????【GUARANTEE】We are willing to offer refunds for products with quality issues, please feel free to contact us.
Welcome to AUTUT & Enjoy your shopping
????AUTUT is committed to providing you with good quality auto parts.
????Contact the AUTUT Team when you encounter any product issue, we’re willing to help you whole-heartedly.
????Please carry out the return and exchange process in the Amazon Help Center or your order page.
????Please refer to Amazon’s return and exchange policy for the progress of return and exchange. Seller cannot interfere with the progress of the refund, please understand.
Features:
????This Shark Fin antenna with FM/AM connection cable inside.
????Exclusively trendy design, get your car stand out from crowd.
????Different color option, choose the coolest one for your car.
????Self adhesive back for easy installation. No need to use other tool
????Installation requires no modification and easily reversible.
Warm tips:
1. Ensure installation in a good weather condition.
2. Clean surface with rubbing alcohol or prep solvent and allow to dry completely.
3. Heating the double-sided tape with a lighter to increase viscosity, prevent product shedding.
4. Allow to set for 24 hours.
Product Specifications:
Product Name: Shark Fin Antenna
Material: Plastic & Metal
Color: Black
Shape: Shark Fin
Size(L*W*H): 156 x 76 x 75mm/ 6.1 x 3 x 3″
Metal Ring Inner Dia: 5mm/ 0.2″
Cable Length: 18cm/ 7.1″
9 MOON ABS Varnish Newest Design Special Functional Shark Antenna Car with Blank Radio Shark Fin Antenna for Skoda Octavia Fabia Superb Rapid Yeti 5 Color-Black
Material:ABS Varnish Size:16×7.5×6.5cm Rare Decorating Parts and keep your car unique and eye-catching..
Kayme 6 Layers Car Cover Waterproof All Weather for Automobiles, Outdoor Full Cover Rain Sun UV Protection with Zipper Cotton, Universal Fit for Sedan (Up to 177")
- 【Premium Material】— Kayme 6 Layers Car Covers Are Made Of Heavy Duty Material. (1) Pe&Peva Are 100% Waterproof, It’s Great For Rainproof Snowproof. (2) High Reflective Aluminum Is Good At Sunproof And Anti-Uv, Keeps Car Cool In The Hot Day. (3) Thicker Cotton Protect Vehicle Paint. Kayme Multi-layer Material Are Much More Thicker And Durable Than Other Similar 6 Layers Products.
- 【Professional Design】— 1.With Door Zipper In The Left Of The Cover For Easy Access. 2. Windproof Straps At Front & Rear To Fix Your Auto Cover In Heavy Wind Weather. 3. 6pcs Reflective Stripes To Remind The People In The Night. 4.Pretty Mirror Pockets Make The Cover More Suitable.
- 【Dimension】— A0 Is Universal Fit For Sedan Which Length Is Up To 177 Inch. (Not For Hatchback SUV). Come With A Large Enough Portable Storage Bag To Keep Your Cover.
- 【Complete Protection】— No Matter The Hot Sun Or The Cold Weather. Kayme Car Covers Can Handle It All. The Powerful Material Keeps Your Car Safe From UV Rays, Sand, Dust, Leaves, Branches, Snow, Rain, Frost, Birds Dropping.
- 【Warm Reminder】— Please Check The Car Details Before You Choose The Car Cover. 1. Sedan Hatchback Or SUV, 2. Date Of Manufacture, 3. Car Length.
Conclusion
By our suggestions above, we hope that you can found 4In Shark Fin Antenna for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 4In Shark Fin Antenna, eg:
- What are Top 10 4In Shark Fin Antenna for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 4In Shark Fin Antenna to buy?
- What are Top Rated 4In Shark Fin Antenna to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 4In Shark Fin Antenna?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 4In Shark Fin Antenna.
- Before deciding to buy any 4In Shark Fin Antenna, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 4In Shark Fin Antenna and What you should consider when buying the 4In Shark Fin Antenna and Where to Buy or Purchase the 4In Shark Fin Antenna. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 4In Shark Fin Antenna of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 4In Shark Fin Antenna.